| タイトル |
-
en
Removal kinetic model of oil droplet from o/w emulsion by adding methylated milk casein in flotation
|
| 作成者 |
|
| アクセス権 |
open access |
| 主題 |
-
Other
en
Flotation
-
Other
en
o/w emulsion
-
Other
en
Removal model
-
Other
en
Methylated milk casein
-
Other
en
Separation
-
NDC
517
|
| 内容注記 |
-
Abstract
en
In this study, o/w emulsion flotation experiments were conducted by adding methylated milk casein (MeSC). Emulsion used in this study was prepared by ultrasonic emulsification of heavy oil (bunker-A) and sodium dodecyl sulfate (SDS) solution. A simple kinetic model was proposed to estimate the removal rate of the oil droplets within the column. The model was based on main assumption that adsorption of single droplet adsorbed MeCS or floc onto bubble surface within flotation column. Removal rate constant, K, was defined by ka Xs (Sbτ/V), where ka and Xs are overall adsorption rate and saturated adsorption density of oil droplet or floc, Sb, τ and V are bubble surface production rate, retention time of bubble swarms and emulsion volume within the column, respectively. The experiments were conducted with varying operating conditions; superficial gas velocity, column dimension and emulsion volume. K was evaluated from slope value of obtained straight line by plotting time versus ln (T/T0), where T/T0 is relative turbidity. K was mostly proportional to (Sbτ/V), which corresponds to specific surface area of bubble swarms per unit volume within the column, in the present experimental region. This result suggested that efficiency of this removal process was mainly controlled by the specific surface area of bubble swarms, and proposed model was fundamentally verified.
|
| 出版者 |
en
Elsevier
|
| 日付 |
|
| 言語 |
|
| 資源タイプ |
journal article |
| 出版タイプ |
AM |
| 資源識別子 |
HDL
http://hdl.handle.net/2115/49431
|
| 関連 |
-
isVersionOf
DOI
https://doi.org/10.1016/j.watres.2012.03.016
-
PMID
22483713
|
| 収録誌情報 |
-
-
en
Water Research
-
巻46
号9
開始ページ3094
終了ページ3100
|
| ファイル |
|
| コンテンツ更新日時 |
2023-07-26 |
